What is 14 SEER?
The seasonal energy efficiency ratio is fixed by the government for minimum energy consumption. The minimum SEER is 13 and the maximum SEER is 22.14 seer gives the value of cooling output by total energy consumption in a specific season as 14.14 SEER has a one-stage compressor.
The compressor is a mechanical device present in all technological devices used for cooling. It compresses the air under low pressure which cools the air getting out of the device.
The single-stage compressor is also known as a piston compressor. The cost of installation of 14 SEER is between $3000 to $6000 which is approximately 2 lakhs twenty-five thousand and sixty-seven rupees. to 4 lakhs fifty thousand one hundred and thirty-five rupees in INR.
The presence of a single-stage compressor makes the cost price of 14 SEER less and a bit pocket-friendly. Also, as 14 seer has a single-stage compressor the runtime is longer.
To adapt to environment 14 SEER the single-stage compressor of the air conditioner either has to run at full speed or shut off completely. It also makes the environment quite humid.
What is 16 SEER?
16 SEER gives the ratio between cooling output and total energy consumption in a specific season as 16. This ratio tells about the higher efficiency of 16 SEER.This ratio tells about the higher efficiency of 16 SEER.
After several calculations, it was founded that 14 SEER uses 13 percent of more energy than 16 SEER units device. The meaning of using 13 percent more electricity is that 14 SEER uses 13 watts of more energy than the 16 SEER units device.
16 SEER has a two-staged compressor. The two-staged compressor compresses air in two stages. It comes in two pistons. One piston passes the air from one cylinder to another while the second piston pumps the air. The two-staged compressor helps the air conditioner to adapt to the environment easily
Unlike,14 SEER 16 SEER needs not to be run all the time or shut off completely to maintain the temperature. The two-staged compressor makes the temperature of the environment consistent as it has longer run-time. The consistent temperature makes it very comfortable for the user.
Two staged compressor makes the environment less humid and hence the environment is comfortable. But, the cost of the installation of 16 SEER is a bit costly. The price range is $4000 to $9000 that is 3 lakhs and three hundred and thirty-four rupees to six lakhs seventy-five thousand seven hundred and seventy-four rupees in INR.
Difference Between 14 SEER and 16 SEER
- 14 SEER units are less efficient while in contrast, 16 SEER is more efficient.
- 14 SEER unit has a single staged compressor whereas 16 SEER unit has a two-staged compressor.
- The cost of installation of 14 SEER units is less than 16 SEER units.
- As 16 SEER unit has a single staged compressor it makes the environment less humid than 14 SEER units.
- The runtime of 14 SEER units is less than 16 SEER one.
- The environment of 16 SEER units is more comfortable than 14 SEER units.
Comparison Between 14 SEER and 16 SEER
| Parameters of Comparison | 14 SEER | 16 SEER |
| Value of SEER | The value of ratio in this one is 14. | The SEER value is 16. |
| Efficiency | The efficiency of 14 SEER is less. | It is more efficient than 14 SEER. |
| Compressor | 14 SEER has single stage compressor. | It most of the time has two-stage compressor. |
| Cost | Cost of installing 14 SEER is about $3000 to $6000 | Cost of installing 16 SEER air conditioning is about $4000 to $9000 |
| Humid | Because of single-stage compressor environment is more humid. | Humidity in 16 SEER is less than 14 SEER. |
| Run-Time | The run-time of 14 SEER is less than 16 SEER. | Presence of 16 SEER gives longer run-time |
| Comfortability | The environment is less comfortable in comparison to 14 SEER. | Less humidity and longer run time makes the environment more comfortable. |